BCC6A Generator Battery Charger Auto Intelligent Float Charging Circuit Board Adapter for Generator Parts 6A 12V 24V 3A(3A 24V)

Battery ChargersI. OverviewThis charger is specially designed for the lead-acid battery used in the engine. It adopts constant current fast charge, current limit, trickle float charge Three-stage intelligent control mode. Can be charged for a long time without damage to the battery, can maintain the battery fully charged state and can Ensure battery life. This charger can be used in parallel with the engine charging generator.The charger needs to be disconnected.Two, performance and characteristicsUsing metal shell, good heat dissipation effect and strong anti-interference ability;Using advanced switching power supply results, wide AC input voltage range;Three-stage intelligent charging, automatically maintain battery power;With short circuit and anti-reverse protection function;With fine adjustment of charging voltage and charging current;With LED status display3. Charging characteristic curveOperation instruction1. Charge voltage regulation:When the charger is installed on site for voltage regulation, the battery must be disconnected from the charger and the voltage potentiometer (VOLT) must be adjusted at the same time as the output voltage of the charger is measured until the appropriate value is reached.Clockwise adjustment of the VOLT potentiometer can increase the output voltage and reduce the output voltage by counterclockwise adjustment.2.Charge current regulation:When adjusting the current, please connect the charger output with the accumulator group correctly, adjust when the charging voltage is not higher than 25.0V (12.5V), adjust the current potentiometer (AMP) while measuring the charging current to achieve the appropriate charging current.Clockwise adjustment of the AMP potentiometer can increase output current and counter clockwise adjustment to reduce output current.3.Export insurance replacement:This charger has the output anti-contact anti-insurance FUSE (10A), when the output is connected back, the insurance will burn out, please connect the battery correctly, replace the fuse, the charger will to normal work. The replacementsteps are as follows:1) Press hard on the slotted screwdriver, screw counter-clockwise and then take outthe fuse.2) Put a fuse into the block, press the slotted screwdriver and screw clockwise.==========Hign-concerned Chemical : NoneModel Number : BCC6ANominal AC Voltage : AC 100~280VMax.AC Voltage : Ac 90~305VAC Frequency : 50Hz/60Hz

• Battery Chargers
• BCC6A Generator Battery Charger Auto Intelligent Float Charging Circuit Board Adapter For Generator Parts 6A 12V 24V 3A