Acouto 512Hz Underground Pipe Locator - - Portable LED Display for Accurate Pipeline Inspection and Clogging Detection

1. Built in Sensing Coil: The underground pipeline handheld detector is equipped with a built in sensing coil, can receive magnetic signals from the pipe, the coil generates an induced current to calculate the direction and position of the transmitter. 2. Wide Application: The underground pipe locator is suitable for water supply pipes, cable pipes, underground construction, cave exploration, underwater research, and more. Use it for efficient exploration work. 3. LED Screen Display: The water supply pipe locator comes with an LED screen, providing clear and convenient monitoring data. Enhance your exploration experience with this practical feature. 4. High Accuracy: The 512Hz transmitter allows easy determination of probe location. The features a separated tilt sensor to obtain and zero signals, ensuring effective exploration. 5. Sturdy Construction: Made from premium ABS material, the pipeline blockage locator is sturdy and water , suitable for underwater measurements, ensuring long lasting use. Specification: Item Type: Underground Pipe Locator Working Frequency: 512Hz Modulation: None Battery: 6 x AA Batteries (Not Included) Usage Time: 4 Hours Intermittent Use Sound Output: 50-1000Hz Depending on Signal Strength Operating Temperature: -20℃ to 60℃ Assembled Length: Approx. 535mm / 21.06in Sensor: Separation angle sensor for and zero signal acquisition Weight: Approx. 1805.00g / 63.67oz How to Use: Overall Layout Power On/Off (Long press to power on; Long press to power off) Near/Far switch controls the overall sensitivity. It is recommended to use the 'Far' position when starting to locate the transmitter. When you are close to the transmitter and the meter reaches full scale and you cannot further reduce the sensitivity, switch to 'Near' to pinpoint its exact location. Meter Indicator - Indicates the strength of signal (right side) and zero signal (left side). Speaker - Allows you to hear the signal beep or continuous sound from the transmitter, depending on the transmitter use Box/Cover. Battery Indicator - Displays battery health status. Instructions: Adjust the locator's Near/Far switch and signal +/- according to the actual environment to better match the transmitter. It is recommended to initially set to Far mode (Signal set to 9), reduce signal sensitivity level when the LED screen shows a very strong signal (you can also hear a louder sound), and then narrow down the detection range. packing list: 1 x Detector 1 x Detector Accessories 1 x User Manual 1 x Earphone 1 x Aluminum Box/Cover Notice: 512 has only one mode, the 'detector' mode. In detector mode, the searches for signals transmitted by a small probe or camera with a built in transmitter that is wired through pipes. The detector must emit a 512Hz signal, and the can determine the approximate depth of the target. First, turn on the , walk around keeping the at waist height, then walk towards the general direction of the transmitter while slowly sweeping the backwards while pointing towards the transmitter. You will notice the signal getting stronger. As you get closer, adjust the sensitivity as needed to keep it within range. When you cannot keep the meter below full scale, switch to 'near' and continue moving towards the direction of the stronger signal. When you reaching the point where the signal seems strongest, moving in any direction will weaken it, and then you know you have found the detector directly below the antenna pole. Move to another location, search for this signal again, see if you always return to the same spot for confirmation. If you correctly perform each step, you should consistently find yourself right above the transmitter each time. Keep practicing until you get consistent results. The product does not include a transmitter and requires a 512Hz transmitter to be used.

• Built-In Sensing Coil - Equipped with an advanced built-in sensing coil, this underground pipe locator excels at receiving magnetic signals from various pipes. The coil generates an induced current, allowing the device to accurately calculate both the direction and position of transmitters. Consequently, it provides you with precise information to facilitate your underground exploration projects, whether in residential areas or industrial sites.
• Wide Application - Versatile and practical, the underground pipe locator is suitable for a plethora of applications, such as detecting supply pipes, cable pipes, and facilitating underground construction. Additionally, it is for cave exploration and underwater research endeavors. With this tool, you can efficiently conduct exploration work, saving both time and resources while ensuring safe operations in diverse environments.
• LED Screen Display - To improve usability, this supply pipe locator features a high-visibility LED screen that enables real-time monitoring of data. This practical display enhances your exploration experience by providing immediate feedback on pipe locations and conditions. You'll appreciate the clarity and convenience it offers, making it easier to interpret results during inspections or analysis.
• High Accuracy - Enhanced by a 512Hz transmitter, this device guarantees that probe locations are determined with remarkable accuracy. The includes a separate tilt sensor to effectively obtain and signals. This sophisticated design ensures that you have the most reliable information at your fingertips, which is crucial when dealing with underground pipe systems, thereby minimizing the chance of errors during exploration.
• Sturdy Construction - Built to last, the pipeline blockage locator is made from premium ABS material, ensuring robustness and resistance. This resilience is especially beneficial for underwater measurements, making it an essential tool in various conditions. Its design means you can rely on it for longevity and consistent performance, whether you're working ground or submerged.