600W 900W 1200W Programmable DC Regulated Power Sourec Adjustable Constant Voltage Constant Current Programmable DC Power Supply(60V 10A 600W,220V)

Multi Testers600W 900W 1200W Programmable DC Regulated Power Sourec Adjustable Constant Voltage Constant Current Programmable DC Power SupplyProduct DescriptionFeature:(1) RS485 serial port is standard;(2) SENSE serial port is standard;(3)MUDBUS communication protocol;(4) The set value and the actual value are displayed in the same frame and can be compared; (5) The maximum is 11 days; (6) Single up to 12 hours;Application:(1) Aerospace Testing (2) Photovoltaic and energy storage system (3) energy vehicle (4) Data center (5) Industrial motor (6) Power semiconductor module (7) Automated test system (ATE) (8) Lithium fuel cell (9) Aging of electronic equipment (10) Precision electroplating, splashing and surface treatmentNoted: PC changed name to PE!Input voltage: 220V/110V+10%Input frequency: 50Hz/60HzOutput voltage: constant voltage range: 0-V rated value adjustableOutput current: constant current value range: 0-A rated value adjustableVoltage stability: +(0.2%+0.05V)Current stability: +(0.5%+0.05V)Load stability: 0.5%Protection functions: over-voltage protection, over-current protection, over-power protection, over-temperature protection, short-circuit current limitingCooling mode: intelligent temperature-controlled fan, adjust the speed according to the load<;10W: 1mW; 10W: 10mW; 100W: 0.1W; 1000W: 1W<;100A: 10mA; 100A: 100mAVoltage resolution: 4-bit LED display+1% ± 1 wordPacking List1 * DC power supply1 * Power cord1 * Test line (clamp)1 * Instructions1*weight*8KG1. Communication Function : The back can be equipped with an RS232/USB/485 programming interface, supporting Modbus programming instructions.1.Adjustable DC regulated power supply: With five major functions: overvoltage protection (OVP), overcurrent protection (OCP), overvoltage protection (OPP), overheating protection (OTP), and short circuit protection2.SENSE compensation: Remote measurement terminals can be optional on the rear panel. When an electronic load consumes a high current, it will generate a significant voltage drop between the connected device and the load terminal, which can compensate for the voltage drop in the load wire. You can use this terminal to measure the output terminal voltage for more accurate measurement data3.Professional testing of DC power supply: Resolution: 10mV/10mA. High precision and resolution, low ripple and low noise. Suitable for use scenarios such as equipment aging and lamp testing4.List function: You can use the list function to create various output change sequences, including multiple steps to set single step voltage, single step current, single step delay time, repeat time, and save list sequence files. After receiving the trigger signal, the power supply will start working according to the order you edited. This feature facilitates your testing, saves you time and improves your work efficiencyDetailed Images

• Multi Testers